Three ESP32 LiPo boards fanned out beside one shield: each board black with the PCB antenna at the top, 13 labelled pins down each side, a white battery socket and a USB-C socket at the bottom; the shield has an ON/OFF switch, two white battery sockets marked TO ESP32 and LIPO BTT, and USB printed at its lower edge.

You have thisesplipo

ESP32 LiPo Dev Kit: 3 Boards with LiPo Charger + 3 Shields

Three classic ESP32 boards that charge a lithium cell from USB-C and run from it when the cable comes out, and three shields to wire them on. Which cell, which socket, which way round, and how long a cell lasts.

Boards + shields: 3 + 3
Charger: 500mA
Cell: 3.7V, one cell

Start here · 01 Unplug it and it keeps running The reference

Product questions & answers ↓

The whole handbook13 articles · 60 min DatasheetPDF · espressif.com Pinout and specsThe pin table, and the questions people ask first

Community

Product questions

See what other owners have asked, and read their solutions.

Ask a question ↗

ESP32 LiPo Dev Kit: 3 Boards with LiPo Charger + 3 Shields

Loading discussions…

View all on the community ↗Read here. Sign in to the community to post or reply.

Need another

ESP32 LiPo Dev Kit: 3 Boards with LiPo Charger + 3 Shields

Buy direct Buy on Amazon

Order or missing parts?

Email us or reply to your order, and quote esplipo — that identifies the product. If something is missing from the bag, your order is the record of what shipped.

Take it with you

Point a phone camera at the code and this page opens there. It is the same address as the one printed on your box, so it is also what to show someone you are passing the board to.