The kit laid out flat: a full-size white breadboard on the left, three bundles of rainbow jumper wires, a black USB-C power module printed lonely binary, five push buttons with coloured caps, a row of potentiometers and sensors, and long rows of ceramic capacitors, diodes, LEDs in five colours and resistors across the bottom.

You have this

Electronics Starter Kit, Breadboard, Power Module and Components

A boxed set of the parts most breadboard circuits start with: an 830-point breadboard, a USB-C power module switchable between 3.3 V and 5 V, jumper wires, resistors, capacitors, LEDs, buttons, potentiometers, diodes, transistors, MOSFETs and two sensors. How to read the parts, set up the bench, and build the first circuits.

Tie points: 830
Power module: 5 / 3.3V, USB-C
Jumper wires: 120in three kinds

Start here · 01 What is in the box The reference

Product questions & answers ↓

The whole handbook16 articles · 80 min Pinout and specsThe pin table, and the questions people ask first

Community

Product questions

See what other owners have asked, and read their solutions.

Ask a question ↗

Electronics Starter Kit, Breadboard, Power Module and Components

Loading discussions…

View all on the community ↗Read here. Sign in to the community to post or reply.

Need another

Electronics Starter Kit, Breadboard, Power Module and Components

Buy direct

Order or missing parts?

Email us or reply to your order, and quote estkit — that identifies the product. If something is missing from the bag, your order is the record of what shipped.

Take it with you

Point a phone camera at the code and this page opens there. It is the same address as the one printed on your box, so it is also what to show someone you are passing the board to.