The TK94 at an angle: a black board with a gold edge, a black square silicone cap with a round boss over the five-way switch, small resistors beside and under it, a brown capacitor above four right-angle header pins, lonely binary up the left edge and ANALOG up the right.
VR

View it in VR

This board opens in a VR headset: life-size, or big enough to stand beside, with every pin and every part named where it sits. Open this address in the browser on a headset such as Apple Vision Pro or Meta Quest.

learn.lonelybinary.com/vr/tk94
You have this

Five-Direction Joystick

A five-way navigation switch on one analog pin: four tilts and a press, each joining SIGNAL to its own point of a chain of 10 kΩ resistors, so each push is its own voltage. Read it with analogRead, not digitalRead. VCC is your board's logic voltage.

Output
Analogone SIGNAL line, 0 V at rest
VCC
3V3 or 5Vyour board's logic voltage
Wires
3of 4; NC is not connected
Height
12.8mm to the top of the cap

Three holes to wire and NC to leave empty. Click the resistors: five in a chain from VCC to GND, and the one from SIGNAL to GND that holds it at 0 V until you push.

Product questions & answers ↓

Community

Product questions

See what other owners have asked, and read their solutions.

Ask a question ↗

Five-Direction Joystick

Loading discussions…

Need another

Not on general sale yet. Reply to your order and we will sort out a spare — quote tk94.

Order or missing parts?

Email us or reply to your order, and quote tk94 — that identifies the product. If something is missing from the bag, your order is the record of what shipped.

Take it with you

Point a phone camera at the code and this page opens there. It is the same address as the one printed on your box, so it is also what to show someone you are passing the board to.