DHT22
2 pages across tutorials, modules, pinouts and guides.
beginnerModuleUpdated
DHT22 Temperature and Humidity Sensor
A DHT22 on a TinkerBlock board, the TK39: temperature from −40 to 80 °C to ±0.5 °C and humidity from 0 to 100 % to ±2 %, in tenths, on one data wire. The 10 kΩ pull-up is fitted, so it is three wires and one library. Feed VCC what your board's pins run at, and read it no more than once every two seconds.
beginnerTutorial
Put a DHT22 on the internet in 20 minutes
Wire a temperature and humidity sensor to an ESP32-S3, and watch the readings land on a live dashboard you can open from your phone. No backend, no server, no port forwarding.