ShopLearnFluxgrid
Support
Lonely Binary
ESP32TinkerBlockProductsFundamentalsTools
AccountCart
Tags

st7735

2 pages across tutorials, modules, pinouts and guides.

beginnerModuleUpdated

SPI TFT LCD Display Boards, 0.96 to 3.5 inch

Six colour SPI display boards that are one circuit on six outlines: the same eight holes, the same 15-way ribbon socket, a backlight switched by a transistor, and a driver library that takes one constant per size. Which size to pick, how to wire it, and what is different about each.

Displays· ESP32-S3, ESP32, ESP32-C3, Raspberry Pi, Raspberry Pi Pico, Arduino· 7 min
beginnerModuleUpdated

1.8-inch TFT Display

A 1.77-inch colour TFT, 128 by 160 pixels, with an ST7735S controller on SPI, on a TinkerBlock board with an eight-pin header. 3.3 V only, with nothing on the board to shift 5 V signals down: an Uno goes through a TK97. The backlight stays off until BL is driven HIGH.

Displays· ESP32-S3, ESP32, Arduino, Raspberry Pi· 5 min
Lonely Binary

From Zeros to Heroes, One Bit at a Time.

Sydney, Australia · office@lonelybinary.com

Shop
BoardsKitsSensors & InputDisplaysBest SellersWholesale
Learn
ESP32TinkerBlockProduct handbooksFundamentalsDownloadsProduct codes
Fluxgrid
Get startedCheat sheetDocsLibrary on GitHubPrivacy policy
Help
Contact usDeliveryReturnsWarranty
© 2026 Lonely BinaryTermsRefund policy