A red-cased 8x8 matrix showing an upward arrow in red LEDs, with an unlit blue module and an unlit green module beside it, above the teal box printed 8X8 MAX7219 DOT MATRIX LED DISPLAY and the loose parts — a long male pin header strip, three black female sockets, the green and blue case frames and their two black back panels.

You have thism8x8

8x8 LED Matrix MAX7219, 3-Pack

Sixty-four LEDs and a MAX7219 that scans them for you. Two boards share this page — the TinkerBlock TK52 and the chainable module that comes three to a box — and only one of them can be chained.

In the box: 3modules
Pixels: 8 × 8per board
Signal wires: 3DIN CLK CS
Supply: 5V

Start here · 8x8 LED Matrix The reference

Product questions & answers ↓

DatasheetPDF · cdn-shop.adafruit.com Pinout and specsThe pin table, and the questions people ask first

Community

Product questions

See what other owners have asked, and read their solutions.

Ask a question ↗

8x8 LED Matrix MAX7219, 3-Pack

Loading discussions…

View all on the community ↗Read here. Sign in to the community to post or reply.

Need another

8x8 LED Matrix MAX7219, 3-Pack

Buy direct Buy on Amazon

Order or missing parts?

Email us or reply to your order, and quote m8x8 — that identifies the product. If something is missing from the bag, your order is the record of what shipped.

Take it with you

Point a phone camera at the code and this page opens there. It is the same address as the one printed on your box, so it is also what to show someone you are passing the board to.