The TK52 at an angle: an 8 by 8 LED matrix standing as a thick square block over most of a black board, and in front of it a strip of board with two round mounting holes and a right-angle six-pin header printed GND, VCC, CS, DIN, NC and CLK.
VR

View it in VR

This board opens in a VR headset: life-size, or big enough to stand beside, with every pin and every part named where it sits. Open this address in the browser on a headset such as Apple Vision Pro or Meta Quest.

learn.lonelybinary.com/vr/tk52
You have this

8x8 LED Matrix

Sixty-four red LEDs and a MAX7219 that scans them for you, on the TinkerBlock TK52: five wires, VCC on 5 V, a picture sent as eight bytes. The page is shared with the chainable 3-pack module, and only that one can be chained: the TK52 has no DOUT.

Pixels
8 × 8red LEDs
VCC
5V on every board
Signal wires
3DIN CLK CS
Brightness
16levels

Every pin and part: the six-pin header with NC on nothing and no DOUT, and under the matrix the MAX7219, R7 that sets the LED current, and the supply capacitor.

Product questions & answers ↓

Community

Product questions

See what other owners have asked, and read their solutions.

Ask a question ↗

8x8 LED Matrix

Loading discussions…

Need another

Not on general sale yet. Reply to your order and we will sort out a spare — quote tk52.

Order or missing parts?

Email us or reply to your order, and quote tk52 — that identifies the product. If something is missing from the bag, your order is the record of what shipped.

Take it with you

Point a phone camera at the code and this page opens there. It is the same address as the one printed on your box, so it is also what to show someone you are passing the board to.