The standard adapter from above at an angle: a long black board with a USB-C socket in the middle of its far edge, a silver slide switch on each half with 5V and 3V3 printed at its two ends, a red LED by each 5V label and a blue LED by each 3V3, and at each end a plus and minus mark over two columns of three pins, the pins pointing down underneath.
VR

View it in VR

This board opens in a VR headset: life-size, or big enough to stand beside, with every pin and every part named where it sits. Open this address in the browser on a headset such as Apple Vision Pro or Meta Quest.

learn.lonelybinary.com/vr/bbpwd
You have this

Breadboard Power Adapter, Standard 5 V / 3.3 V, 3-Pack

Three USB-C breadboard power adapters that plug into both pairs of rails at one end: a standard board with a 5 V / 3.3 V switch per side, a step-down that sets 1.25 to about 3.5 V, and a booster that sets about 4.3 up to 28 V. Which way round they go, why 5 V reads 4.7, and the half-amp fuse that limits all three.

Each side
5 / 3.3V, by switch
3.3 V budget
200mA, shared
Fuse holds
0.5A in total

Every pin, both switches and the 3.3 V regulator, with the + and − columns laid out the way the board fits a breadboard.

Product questions & answers ↓

Same plug, different voltage

All three fit the breadboard the same way and share one half-amp fuse. Pick by the voltage your circuit needs.

Community

Product questions

See what other owners have asked, and read their solutions.

Ask a question ↗

Breadboard Power Adapter, Standard 5 V / 3.3 V, 3-Pack

Loading discussions…

Need another
Breadboard Power Adapter, Standard 5 V / 3.3 V, 3-Pack
Order or missing parts?

Email us or reply to your order, and quote bbpwd — that identifies the product. If something is missing from the bag, your order is the record of what shipped.

Take it with you

Point a phone camera at the code and this page opens there. It is the same address as the one printed on your box, so it is also what to show someone you are passing the board to.