The kit laid out flat: a hinged storage case, the analyzer in a black shell with its channel map printed on a teal and red label, the two breakout boards, two short micro-USB cables, a ribbon of jumper wires, ten hook clips and five alligator clips.

You have thislogic8

Logic Analyzer Kit, 8-Channel 24 MHz

Eight channels sampled at up to 24 MS/s, straight up a USB cable. It decodes I²C, UART and SPI at the speeds a microcontroller actually runs, and the sample rate is the number that decides the rest.

Channels: 8channels
Sample rate: 24MS/s
One tick: 41.7ns
Connector: 2×50.1 in

Start here · 01 What it actually records The reference

Product questions & answers ↓

Install one of these first

Logic 2 saleae.comNothing to configure — it appears as Logic. Start here.Installing Logic 2

PulseView sigrok.orgTake a nightly build — the releases are years older.Driver fx2lafw Installing PulseView

The whole handbook11 articles · 80 min Pinout and specsThe pin table, and the questions people ask first

Community

Product questions

See what other owners have asked, and read their solutions.

Ask a question ↗

Logic Analyzer Kit, 8-Channel 24 MHz

Loading discussions…

View all on the community ↗Read here. Sign in to the community to post or reply.

Need another

Logic Analyzer Kit, 8-Channel 24 MHz

Buy direct

Order or missing parts?

Email us or reply to your order, and quote logic8 — that identifies the product. If something is missing from the bag, your order is the record of what shipped.

Take it with you

Point a phone camera at the code and this page opens there. It is the same address as the one printed on your box, so it is also what to show someone you are passing the board to.